Unpacking And Assembly; Installation - Whirlpool 7LIECH-SSF-WL User Manual

UNPACKING AND ASSEMBLY

Remove the dispenser from packaging:
TO OPEN:
TOP
1. Lay the box containing the unit on its side.
2. Open bottom flaps of the cardboard box.
3. Stand cooler upright, with box flaps unfolded.
4. Pull box straight up.
5. Unpack the drip tray and insert it into the dispenser.
6. Keep original packing for the duration of warranty.

INSTALLATION

WARNING
Tip Over Hazard
Do not use water cooler until leveling feet are attached
to bottom of water cooler and unit is level.
Failure to do so can result in death or serious injury.
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-855-594-4755 for assistance.
TOP
TOP
Model # 7LIECH-SSF-WL: Page 6
WARNING
Tip Over Hazard
Do not use water cooler until leveling feet are attached
to bottom of water cooler and unit is level.
Failure to do so can result in death or serious injury.
WARNING
Excessive Weight Hazard
Use two or more people to move and install bottles.
Failure to do so can result in back or other injury.
2
4
Foot w th nut
1
3
5
Foot w thout nut