Suzuki Alto800 Manual page 61

Windshield Wipers
EXAMPLE
OFF
INT
LO
HI
53MH0228
To turn the windshield wipers on, move the
lever down to one of the three operating
positions. In the "INT" position, the wipers
operate intermittently. The "INT" position is
very convenient for driving in mist or light
rain. In the "LO" position, the wipers oper-
ate at a steady low speed. In the "HI" posi-
tion, the wipers operate at a steady high
speed. To turn off the wipers, move the
lever back to the "OFF" position.
Windshield Washer
EXAMPLE
53MH0229
To spray windshield washer fluid, pull the
lever toward you. The windshield wipers
will automatically turn on at low speed if
they are not already on and the "INT" posi-
tion is equipped.
WARNING
• To prevent windshield icing in cold
weather, turn on the defroster to
heat the windshield before and
during windshield washer use.
• Do not use radiator antifreeze in
the windshield washer reservoir. It
can severely impair visibility when
sprayed on the windshield, and can
also damage your vehicle's paint.
BEFORE DRIVING
NOTICE
To help prevent damage to the wind-
shield wiper and washer system
components, you should take the fol-
lowing precautions:
• Do not continue to hold in the lever
when there is no windshield
washer fluid being sprayed or the
washer motor can be damaged.
• Do not attempt to remove dirt from
a dry windshield with the wipers or
you can damage the windshield
and the wiper blades. Always wet
the windshield with washer fluid
before operating the wipers.
• Clear ice or packed snow from the
wiper blades before using the wip-
ers.
• Check the washer fluid level regu-
larly. Check it often when the
weather is bad.
• Only fill the washer fluid reservoir
3/4 full during cold weather to allow
room for expansion if the tempera-
ture falls low enough to freeze the
solution.
2-42
53MH0-74E