Toshiba TOSVERT VF-AS1 Function Manual page 16

(2) Remote register (Inverter -> Master)
RWr signal
Address Signal name
RWr n First monitor
Second monitor
RWr(n+1)
(output frequency)
RWr(n+2) Response code
RWr(n+3) Read data
"n" is depend on the station number.
Remote
Address
register
2E0H RWr0
No.1 2E1H RWr1
2E2H RWr2
2E3H RWr3
2E4H RWr4
No.2 2E5H RWr5
2E6H RWr6
2E7H RWr7
When RYnC is on, the monitored value specified to the lower 8 bits of the
monitor code (RWwn) is set.
When "0" is set to the higher 8 bits of the monitor code (RWwn), the current
output frequency is always set. When other than "0" is set to the higher 8 bits
of the monitor code (RWwn) and RYnC is on, the monitored value specified to
the higher 8 bits of the monitor code (RWwn) is set.
When turn on RYnF, the response code correspond to the instruction code of
RWw(n+2) is set. When turn on RYnD or RYnE, the response code
correspond to the instruction code of RWw(n+2) is set. The value "0" is set for
a normal reply and other than "0" is set for data fault, mode error, etc.
For a normal reply, the reply data to the instruction specified by the instruction
code is set.
Remote
Address
register
2E8H RWr8
No.3 2E9H RWr9
2EAH RWrA
2EBH RWrB
2ECH RWrC
No.4 2EDH RWrD
2EEH RWrE
2EFH RWrF
−
Description
Remote
Address
register
2F0H RWr10
No.5 2F1H RWr11
2F2H RWr12
2F3H RWr13
2F4H RWr14
No.6 2F5H RWr15
2F6H RWr16
2F7H RWr17
14 −
E6581288①
Remote
Address
register
3DCH RWrFC
No.64 3DDH RWrFD
3DEH RWrFE
3DFH RWrFF