Entering A New Transmitter Serial Number (Sn#) - Dexcom SEVEN User Manual

7.3 ENTERING A NEW SEVEN TRANSMITTER SERIAL NUMBER (SN#)
Any time you use a new Transmitter or new Receiver as part of your Seven System, you
must enter the Transmitter Serial Number (SN#) into your Receiver. The Transmitter
Serial Number (SN#) is located as a series of 5 numbers and letters on the back of the
Transmitter.
Entering the SN# will begin the unique wireless radio-frequency (RF) communication
between the Transmitter and Receiver. To do this perform the following steps:
1. Press the Down
2. Hold the Down
Screens.
3. From this screen, press the Down
Number Screen below:
4. Press the OK Button to display the entry screen for the Transmitter SN#:
5. The SN# is a series of 5 letters and numbers printed on the back of your Transmitter
(SN# XXXXX).
92 | SEVEN CONTINUOUS GLUCOSE MONITORING SYSTEM
™
Arrow 3 times until you come to the 9-hour Glucose Trend Screen.
Arrow for at least 7 seconds until you come to the Settings
Arrow until you arrive at the Transmitter Serial
Transmitter Serial Number Screen