Reset Settings; Switch (Km/H<->Mph) - Giant E-bike User Manual

General indications
Press General indication button (T) to switch the
following display indications:
- For EVO display:
• Trip time, distance, average speed, top speed,
ODO (total distance), remaining range, cadence.
The display will startup in the position it was switched
off.
In case the power assist mode is in 'OFF', the remai-
ning range will show '999'.
- For Charge display:
• Speed <-> average speed
• Trip distance / ODO (total distance)

3.4.3 Reset settings

Press both Assistance buttons 'up' and 'down' (Q)
simultaneously for THREE seconds to reset trip
distance, trip time and average speed. This reset can
only be done when one of these settings is shown on
the display.
3.4.4 Switch (Km/h<->Mph)
Press the Settings button (T) for 5 seconds to switch
between Km/h and Mph indication.
For EVO displays, Both kilometers and miles units will
be displayed.
For Charge display, only 'km/h' and Km' is displayed'.
Both units 'm' and 'mph' will not be displayed.
11