ENGLISH MITRE SAW DW713 Congratulations! An estimation of the level of exposure to vibration should You have chosen a D WALT tool. Years of experience, thorough also take into account the times when the tool is switched product development and innovation make D WALT one of the most off or when it is running but not actually doing the job.
ENGLISH Read all these instructions before attempting to operate this product 16. Remove adjusting keys and wrenches. and save these instructions. Form the habit of checking to see that adjusting keys and wrenches are removed from the tool before operating the tool. SAVE THIS MANUAL FOR FUTURE REFERENCE 17.
ENGLISH Residual Risks Never use your saw without the kerf plate. Raise the blade from the kerf in the workpiece prior to releasing the The following risks are inherent to the use of saws: switch. – injuries caused by touching the rotating parts Do not wedge anything against the fan to hold the motor shaft.
Your D WALT DW713 Mitre Saw has been designed for professional 2. When mounting your saw to a piece of plywood, make sure that cutting wood, wood products and plastics. It performs the sawing the mounting screws do not protrude from the bottom of the wood.
Page 15
ENGLISH Do not cut light alloy and ferrous metal (containing iron or MITRE LOCK ROD ADJUSTMENT (FIG. 22) steel) or masonry or fibre cement product with this mitre If the base of the saw can be moved while the mitre lock lever (e) is saw.
ENGLISH GUARD ACTUATION AND VISIBILITY Hold the workpiece tightly to the table and the fence when cutting. Keep your hands in position until the switch has been released and The blade guard on your saw has been designed to automatically raise the blade has completely stopped.
Page 17
ENGLISH Clamping the Workpiece (fi g. 3) 1. Whenever possible, clamp the wood to the saw. SQUARE BOX 2. For best results use the clamp (gg) made for use with your saw. Clamp the workpiece to the fence whenever possible. You can clamp to either side of the saw blade;...
ENGLISH INSIDE CORNER NEVER TIE, TAPE, OR OTHERWISE HOLD THE GUARD OPEN WHEN OPERATING THIS SAW. Left side 1. Position the moulding with top of the moulding against the fence. 2. Save the left side of the cut. Right side Dust Extraction (fi...
ENGLISH Optional Accessories WARNING: Since accessories, other than those offered by D WALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only D WALT, recommended accessories should be used with this product.
Page 28
DW713 DEWALT DEWALT DW713 230/115 230 V 10 A 230 V 13 A 1,600 115 V 16 A 5,000 Ω left right left right dB(A) dB(A) dB(A) dB(A) m/s² m/s² (250-300 Lux) (FI)