Specify The Type Of Amplifier You Have Connected; Tuning The Guitar (Tuner) - Boss GT-1 Owner's Manual

Specify the Type of Amplifier You
Have Connected
1.
Press the [MENU] button.
2.
Use the [1] knob to select "OUTPUT," and then press
the [ENTER] button.
3.
Use the [3] knob to select the type of amp.
Value Explanation
Choose this if connected to the guitar input of
JC-120
a Roland JC-120 guitar amp.
Choose this if connected to a small guitar
SMALL AMP
amp.
Choose this if connected to the guitar input
of a combo-type guitar amp (i.e., a single unit
that contains the amp and speaker) other
COMBO AMP
than the JC-120.
For some types of guitar amps, the "JC-120"
setting might produce better results.
Choose this if connected to the guitar input of
STACK AMP a stack-type guitar amp (i.e., one in which the
amp and speaker are separate units).
Choose this if connected to the RETURN jack
JC-120 RETURN
of the JC-120.
Choose this if connected to the RETURN jack
COMBO RETURN
of a combo-type guitar amp.
Choose this if connected to the RETURN jack
of a stack-type guitar amp. You should also
STACK RETURN choose "STACK RETURN" if you're using a
guitar power amp together with a speaker
cabinet.
Choose this if you're using headphones, or if
LINE/PHONES the GT-1 is connected to monitor speakers,
mixer, or digital recorder.
4.
Press the [EXIT] button a number of times to return
to the play screen (p. 4).
MEMO
In the play screen (p. 4), you can adjust the output level
of the entire GT-1 by turning the [3] knob.

Tuning the Guitar (TUNER)

1. Press the [ H ], [ I ] switches simultaneously.
2.
Play an open string, and tune it so that only the
center indicator in the screen is lit.
MEMO
You can also tune while watching the [ H ], [ I ], and
[CTL1] switches.
Too low Tuned
When you finish tuning, press once again the [ H ],
3.
[ I ] switches simultaneously.
Setting the standard pitch
In Tuner mode, you can turn the [1] knob to change the
standard pitch of the tuner.
Pitch
435–445 Hz (default: 440 Hz)
Output setting
In the tuner screen, you can also change the output setting
for when the tuner is in use by turning [3] knob
OUTPUT Explanation
MUTE Sound will not be output while tuning.
While tuning, the sound of the guitar being input to
BYPASS the GT-1 will be output without change. All effects
will be off.
Allows you to tune while hearing the current effect
THRU
sound.
Getting Ready
Too high
3