GE NX-4-EUR Installation Manual page 79

42 48 GO TO PROGRAM CODE
43 49 GO TO PROGRAM CODE PARTITION AND AUTHORIZATION
1 Reserved
2 Enables "Go To Program Code" as an arm only code
3 Enables "Go To Program Code" as an arm only code after closing
4 Enables "Go To Program Code" as a master arm/disarm code (can change user codes)
5 Enables "Go To Program Code" as an arm/disarm code
6 Enables "Go To Program Code" to bypass zones
7 Enables "Go To Program Code" opening and closing reports
8 Reserved
44 49 DURESS CODE
45 50 RESERVED
46 50 AUXILIARY OUTPUTS 1-2 SPECIAL TIMING
Segments
Auxiliary output timed in minutes
Auxiliary output to latch
Auxiliary output to stop timing when user code is entered
Auxiliary output to activate only between closing and opening time
Auxiliary output to activate only between opening and closing time
Invert auxiliary output (0 volts going to 12 volts when activated)
Reserved
Reserved
47 50 AUXILIARY OUTPUT 1, EVENT & TIME (open collector 1)
Segment 1
Segment 2
48 50 AUXILIARY OUTPUT 2, EVENT & TIME (relays 2 and open collector 2)
Segment 1
Segment 2
49-50 50 RESERVED
51 52 AUTOTEST CONTROL
Segment 1
Segment 2
Segment 3
Segment 4
52 52 OPENING TIME / AUTO DISARM TIME
Segment 1
Segment 2
53 52 CLOSING TIME / AUTO ARMING TIME
Segment 1
Segment 2
NX-4-EUR Installation manual
Segment 1 (Circle Numbers To Program)
Program the event number for output 1
Program the timing for output 1
Program the event number for output 2
Program the timing for output 1
Program a "1" if the interval is hours, or a "0" for days.
Add a "2" to suppress the daily test or a "3" to suppress
the hourly test
Program the autotest interval from 1-255 days or hours
Program the autotest report in 24 hour time format
Program the autotest report time, minutes after the
hour
Program the hour of the opening time
Program the minutes after the hour of the opening time
Program the hour of the closing time / auto arming time
Program the minutes after hour of closing / auto arming time
Page 79
9-7-1-3-0-0
15-15-15-15-15-15
1
1
2
3
4
5
6
7
8
7=Each siren activation
0 sec.=follow event
7=Each siren activation
0 sec.=follow event
0
1
2
0
8
0
20
0
2
1
2
3
4
5
6
7
8
02/07/06