Customising preferences
❐ In the rear view mode, if you do not touch
the screen for 7 seconds while displaying
the following screens, the screen switches
to the rear view screen automatically.
•
Radio and iPod source screens
Advanced App Mode screen
•
CAUTION
Pioneer recommends the use of a camera
which outputs mirror-reversed images.
Otherwise, the screen image will appear re-
versed.
❐ Immediately verify whether the display
changes to a rear view camera image when
the gearstick is moved to REVERSE (R) from
another position.
❐ When the screen changes to full-screen rear
view camera image during normal driving,
switch to the opposite setting in "
Polarity
".
1 Display the "System" screen.
➲ For details, refer to Customising the system
settings on page 38.
2 Tap [Camera Polarity].
You can select the following polarity:
•
Off (default)
: When the rear view camera
is not connected to this product.
•
Battery
: When the polarity of the con-
nected lead is positive while the gearstick
is in the REVERSE (R) position.
•
Ground
: When the polarity of the con-
nected lead is negative while the gear-
stick is in the REVERSE (R) position.
Setting the video signal
You can select the suitable video signal setting
for your country.
❐ As this function is initially set to "
product will automatically adjust the video
signal setting.
However, the screen may turn black or im-
ages may not be displayed properly when
"
Auto
tion is weak. Normally, select the appropri-
ate TV signal.
❐ Regarding your country TV signal, consult
with your nearest Pioneer dealer.
❐ You can operate this function only for the
video signal input into the AV input.
1 Display the "System" screen.
➲ For details, refer to Customising the system
settings on page 38.
2 Tap [Video Signal Setting].
Camera
The "
Video Signal Setting
3 Tap
signal.
Auto (default)
PAL-N
" has been selected and the recep-
" screen appears.
or
to select the desired video
—
PAL
—
NTSC
—
SECAM
Chapter
08
Auto
", the
—
PAL-M
—
43
Engb