BMW F800R Rider's Manual page 107

ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque.
Damage, or threaded fasteners
work loose.
Always have the security of
the fasteners checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Slip spacing bushing 1 into
the wheel hub on the left-hand
side.
ATTENTION
Front wheel installed wrong
way round.
Risk of accident
Note direction-of-rotation ar-
rows on tyre or rim.
Roll the front wheel into posi-
tion between the front forks.
Lift front wheel and fit quick-
release axle 1.
Remove front-wheel stand and
firmly compress front forks sev-
eral times. Do not operate the
brake lever in this process.
Installing the front-wheel stand
( 91).
Install screw 1 and tighten to
specified torque. Counter-hold
quick-release axle on the right-
hand side.
Screw in front-wheel
quick-release axle
50 Nm
Tighten axle clamping screws 2
to the specified tightening
torque.
9
105
z