Panasonic DX-600 Service Manual page 25

2.2.4. Transmit Guide (301) Assembly, Scanning Glass (308)
(5)
(3)
(7)
(1)
(2)
(2)
(2)
Edition 1.0
(4)x4
(6)
(8)
(1)
(2)
(1) Remove the Left Cover (103), Right Cover
(102), and Front Cover (104) (Refer to 2.2.2.).
(2) Remove the Control Panel Unit
(Refer to 2.2.3.).
(3) Release the Harnesses from the clamps.
(4) Remove 4 Screws (19).
(5) Disconnect 4 Connectors (CN1, 3, 5 and 7) on
the SC PC Board.
(6) Remove the Transmit Guide (301) Assembly.
(7) Carefully release the Latch Hook using a
Blade-tip Screwdriver.
(8) Remove the Scanning Glass (308).
<Cleaning the Scanning Glass>
(1) Open the Control Panel Unit.
(2) Clean the Scanning Glass (308) with a soft
cloth, soaked with isopropyl alcohol.
<Cleaning the Feed Roller, Eject Roller, ADF
Roller>
(1) Open the Control Panel Unit.
(2) Clean the Feed Roller (302), Eject Roller (303)
and ADF Roller (331) with a soft cloth,
soaked with isopropyl alcohol.
25
DX-600/800
APR 2002