Download Print this page

Panasonic DX-600 Service Manual page 217

Hide thumbs Also See for DX-600:

Table of Contents

CCD Drive Clock Generator Circuit

This circuit is also contained in IC30. Its function is to generate FSG, FCK1, FCK2 and RS clock signals,

which are required for driving the CCD. These clock signals are generated by the system clock generator

circuit derived from the 4 MHz clock signal that is input to IC30. Its timing chart is shown below.The FR

clock supplied to the CCD is output from the RS of IC3. The RS clock of IC3 is derived from the FR clock of

IC30 [MN86075] generates the timing of the RS clock to drive the CCD.

Troubleshooting