Table of Contents
Advertisement
CD
..
Use compact
discs bearing
the symbol
shown below.
In addition
to
conventional 12 cm CDs, this system can be used to play 8 cm CDs without
an adapter.
~Tyd
DIGITAL
AUDID
Note:
Do not touch the disc tray while it is moving.
Never place anything except a compact disc on the disc tray. Foreign
objects can damage the unit.
Do not apply excessive force to the disc tray.
Discs must be placed on the disc tray one at a time
If discs are loaded, you can turn the unit on and begin play immediately
by pressing the
/11, DISC 1, DISC 2 or DISC 3 button.
1.
2.
3.
4.
5.
8.
7.
Press the CD button to select "CD function.
"CD
appears on the
display, then "CD is replaced by "DISC."1"
disc number blinks.
Press one of the DISC SELECT buttons (DISC 1, DISC 2 or DISC 3),
then press the OPEN/CLOSE
button.
If the changer mechanism has detected "NO DISC for the DISC
SELECT button pressed, the tray slides out automatically.
The selected disc tray slides out. "OPEN
appears and the selected
disc number blinks on the display.
Place the disc with the label facing upon the disc tray.
For 12 cm CD
For 8 cm CD
Press the OPEN/CLOSE
button again to close the disc tray.
Note:
To open or close the disc tray, be sure to use the OPEN/CLOSE
button. Do not touch the disc tray by hand.
Repeat steps 2-4
to load another disc.
Press one of the DISC SELECT buttons (DISC 1, DISC 2 or DISC 3).
l—l
l—l
I
/
u.l_l
I
TR
D
"D"
appears, and play starts from the first track of the selected disc.
The track number and elapsed playing time for the current track are
displayed.
If the desired disc number has been selected, the E/11 button can
also be used to start play.
Note:
If the disc is loaded with the label facing downward,
or if a badly
scratched disc is loaded, "NO DISC
appears on the display. If this
occurs, load the disc correctly or replace the damaged disc.
Press the H button (CD section) to end disc play.
When the last track of the last disc has been played, the player stops
automatically.
When the OPEN/CLOSE
button is pressed during play, play will stop
and the disc tray will slide out.
Ejecting or replacing discs
1.
While in the CD play or stop mode, press one of the DISC SELECT
buttons to be ejected, then press the OPEN/CLOSE
button.
While the player is playing one disc, you can eject or replace
another disc without stopping play.
2.
Remove or replace the disc.
3.
Press the OPEN/CLOSE
button.
PLAY
.-... -
Notes on handling compact discs
Do not expose the disc to direct sunlight,
high humidity
or high
temperatures
for extended periods of time.
Discs should be returned to their cases after use.
Do not apply paper or write anything on the disc surface.
Handle the disc by its edge. Do not touch the playing surface (glossy
side).
Fingerprints and dust should be carefully wiped off the playing surface
of the disc with a soft cloth.
Wipe in a straight motion from the centre to the outside of the disc.
Never use chemicals
such as record cleaning
sprays, antistatic
sprays or fluids, benzene or thinner to clean compact discs.
To start play from the desired track
1.
Press the desired DISC SELECT button, then press the
button.
2.
Select the desired track by using the
>/
W or K</<+
button,
then press the HII
button.
Using the remote control
1.
Select the desired disc by pressing the DISC SELECT button, then
press the
button (CD section).
2.
Press two number buttons to select the desired track.
Temporarily
stopping play
Press the
/11 button. "
D"
blinks on the display. To resume play, press
the button again
Skip play
To skip to track 6 while track 3 is playing,
press the
F/
N button
repeatedly until"6
appears in TR on the display. To skip back to track 3
while track 6 is playing, press the !44 /+<
button repeatedly
until "3
appears.
The number buttons on the remote control can also be used for skip
play. To skip to track 6 while one track is playing, press O, then 6.
Search (forward/reverse)
If the E>/
Pl or ~<
/+<
button is pressed during play, the player will
search at high speed in the forward or reverse direction while the button
is being pressed. When the button is released, normal play will continue.
Random play
Press the RANDOM button on the remote control to begin random play.
The player will automatically
select and play discs and tracks at random.
"RANDOM"
appears on the display.
Random play will not function during programmed
play.
Repeat play
Press the REPEAT button on the remote control repeatedly to select the
desired repeat mode in the following sequence. The selected repeat mode
is shown on the display.
REPEAT ONE: Repeat one track.
REPEAT ALL: Repeat all tracks on the selected disc.
REPEAT CONT
Repeat all tracks on all discs.
Released: Normal play mode
Note:
During programmed
play, "REPEAT CONT" can not be selected.
Changing discs during play
While the player is playing one disc, press one of the DISC SELECT
buttons to skip to another disc. "CH DISC blinks for a few seconds, then
the selected disc moves into playing position. Play starts automatically
from the first track on the disc.
-6-
Advertisement
Table of Contents
