Create Send-Text File; Create Text-Capture File; Serial I/O Example Ii - Campbell CR3000 Micrologger Operator's Manual

7.7.18.6.2

Create Send-Text File

Create a file from which to send a serial string. The file shown in the figure
HyperTerminal Send-Text File Example
[2008:028:10:36:22]C to the CR3000. Use Notepad (Microsoft Windows utility)
or some other text editor that will not place hidden characters in the file.
To send the file, click Transfer | Send Text File | Browse for file, then click OK.
7.7.18.6.3

Create Text-Capture File

Figure HyperTerminal Text-Capture File Example
capture file with some data. The file is empty before use commences.
FIGURE 78: HyperTerminal Text-Capture File Example
Engage text capture by clicking on Transfer | Capture Text | Browse, select the
file, and then click OK.
7.7.18.6.4

Serial I/O Example II

CRBasic example Measure Sensors / Send RS-232 Data
CR3000 serial I/O features.
Example — An energy company has a large network of older CR510 dataloggers
into which new CR3000 dataloggers are to be incorporated. The CR510
dataloggers are programmed to output data in the legacy Campbell Scientific
Printable ASCII format, which satisfies requirements of the customer's data
will send the string
(p. 319)
FIGURE 77: HyperTerminal Send-Text
File Example
Section 7. Installation
shows a HyperTerminal
(p. 319)
illustrates a use of
(p. 320)
319