Definitions: Safety Guidelines; Safety Instructions; General Safety Rules - DeWalt D25303DH Original Instructions Manual

English
DUST EXTRACTION SYSTEM
D25303DH
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Contact pressure
Max. drilling depth
Max. drilling diameter
Voltage
Note: Max. drilling depth is only 94 mm when system is used on a rotary
hammer without a quick change chuck.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to these
symbols.

DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal
injury which, if not avoided, may result in property
damage.

Denotes risk of electric shock.

Denotes risk of fire.

Safety Instructions


WARNING! Always observe safety regulations applicable
in your country to reduce the risk of fire, electric shock and
personal injury.
Read all of this manual carefully before operating the attachment.
Also refer to the manual of any power tool that will be used with
this attachment.
SAVE THIS MANUAL FOR FUTURE
REFERENCE

General Safety Rules

1 . Keep work area clear.
Cluttered areas and benches invite injuries.
4
WALT one of the
e
D25303DH
N 60
mm 105
mm 16
V 18
2 . Keep children away.
Do not let children come into contact with the tool or
extension cord. Supervision is required for those under 16 years
of age.
3 . Use appropriate tool.
The intended use is described in this instruction manual. Do
not force small tools or attachments to do the job of a heavy-
duty tool. The tool will do the job better and safer at the rate
for which it was intended.

WARNING: The use of any accessory or attachment or
performance of any operation with this tool, other than
those recommended in this instruction manual may
present a risk of personal injury.
EC-Declaration of Conformity
Machinery Directive
Dust Extraction System
D25303DH
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009 + A11:2010.
These products also comply with Directive
2004/108/EC (until 19.04.2016) and 2014/30/EU (from
20.04.2016). For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Director Engineering
D WALT, Richard-Klinger-Strasse 11,
e
D-65510, Idstein, Germany
01.03.2015

WARNING: To reduce the risk of injury, read the
instruction manual.
Additional Specific Safety Rules for Dust
Extraction Systems
• Do not use the attachment for drilling applications in wood,
steel or plastic.
• Do not use the attachment in core drilling applications.
• Do not use the attachment for chiselling applications.
• Use only power tools recommended by D
attachment. For more information about D
WALT at
e
WALT.
e
WALT with this
e
WALT power tools
e