Stk; Version Check; Working Alone (Optional); Bluetooth Setup (Optional) - SED GPH-610R User Manual

SED GPH-610R
vibration.

STK

The availability of features in this menu
depends on whether or not your SIM card
supports STK. If yes, the STK menu will be
displayed on the screen.

Version Check

You can see IMEI and S/W Version in this
menu.

Working Alone (Optional)

Working alone alarm might start in the following
conditions:
1. "No Motion Alarm" mode : The handset
remains stationary without any operation on it
in a preset time;
"Tilt Alarm" mode : The handset tilts over
the set angle threshold without any operation
on it in a preset time;
Note: default set is "No Motion Alarm" mode.
2. Working alone alarm key has been pressed
User Manual
and held by the users.
You can process working alone related setting
in this menu item.
ON/OFF: You can use this menu to open or
close the working alone function, this option is
set to OFF by default. An icon will be prompted
in the standby interface if open this function.
Note: If support working alone, the Bluetooth is
canceled.

Bluetooth Setup (Optional)

You can make a voice call via Bluetooth device.
However, you have to connect your handset
with the Bluetooth device at first.
This menu has 5 submenus: ON/OFF, Name,
Set Pair PINcode, Bluetooth Scan, Bluetooth
List.
1 ON/OFF: Turn on / Turn off the Bluetooth.
The Bluetooth icon
bar after the Bluetooth device powers up, and it
will disappear after power off.
2 Name: Set Bluetooth name for your handset.
www.malux.se
is displayed in status
- 65 -