Setting Up The Machine Using A Web Browser (Remote Ui) - Canon IR 2420 Network Manual

Setting Up the Machine Using a Web Browser
(Remote UI)
Once the machine is connected to a network, you can set up the machine from a
computer using the Remote User Interface (UI).
NOTE
Before using the Remote UI, make sure that the following settings are set to 'On':
- <Remote UI On/Off> (See Chapter 4, "System Manager Settings," in the Reference
Guide.)
- <Use HTTP> (See "Protocol Settings," on p. 3-2.)
1
Start the web browser ➞ enter the URL below in [Location] or
[Address] ➞ press [Enter].
http://<machine host name or IP address >/
Example) http://172.20.88.125/
IMPORTANT
•
For details about supported web browsers, see Chapter 1, "Using the Remote UI," in the
Remote UI Guide.
•
If you are configuring your web browser to use the proxy server, add the IP address of
the machine to Exception (the address not using the proxy server).
•
Set up the web browser to accept cookies.
•
If the Remote UI is accessed from more than one browser at a time, changes made on
one browser might be overwritten by another. It is recommended that the Remote UI be
accessed from one browser at a time.

Setting Up the Machine Using a Web Browser (Remote UI)

3
3-11