Examples Of Telephone Dial Formats - Thrane&Thrane TT-3064A User Manual

Call Types
The dial formats are shown for auxiliary telephone calls where the off-hook key I and C
is unavailable. On the handset all trailing pound-buttons can be substituted by a single I
or C press, i.e. the sequence UU can be substituted by I or C.
The fields that make up the number are:
• The Terrestrial Network ID
Terrestrial Network ID (TNID) field holds a 3-digit value and specifies the
telephone network to be used.
•
0 Terrestrial Network unspecified (default value)
•
1..255 Terrestrial Network ID 1..255
In most countries only one telephone network exists.
• The LES
LES field holds a 3-digit value and specifies the LES Access Code that shall be used
for the actual telephone call. If no LES field is specified the default LES will be used.
• The Type
Type field holds a 1-digit value and specifies the type of call:
•
0 for AUX Phone calls
•
1 for AUX FAX calls
The value of the type field will over
• The Phone number
Phone number field specifies the subscriber number to be called including call
prefix for automatic calls (00) and country code (e.g. 45 for Denmark). It holds up to 22
digits.
Subscriber Number Format:
Aux.Phone: [Terr. Network IDl] [Lesl][Typel]<Phone number>n
OR
Short Code Format :
Aux.Phone: l[Terr. Network IDl] [Lesl][Typel]<Short code>n
OR
Service Code Format:
Local Call Format:

Examples Of Telephone Dial Formats

Manual Telephone Calls Manual Telephone Calls
Enter call prefix for automatic calls
Enter country code
Enter telephone number
Start the call
Page 26
Handset: [Terr. Network IDl] [Lesl]<Phone number>n
Handset: l[Terr. Network IDl] [Lesl]<Short code>n
<Phone number>n
l<Short code>nn
<2 Digit Service Code>n
<1 Digit Local Code>n
LRNNQQTT
15Oct99
TT
MN
U