Troubleshooting - Gtech HT20 Operating Manual

Troubleshooting

Trimmer fails to operate
Cutting blade will not cut
Blade will not move
Cutting time has reduced
Trimmer stops when cutting
LEDs show solid red
If this doesn't solve your problem don't worry, we will help.
Go to www.gtech.co.uk or call 01905 345 891
1. Recharge battery.
2. Check switch. It will click if
operating correctly.
3. Blade is jammed
1. Blade is either worn or damaged.
2. Replace blade.
1. Clean and lubricate blade.
2. Replace blade.
1. Use lighter cutting action and cut
in several stages.
2. Fully discharge and recharge
battery.
3. Clean and lubricate blade.
4. Replace blade.
1. Wait for automatic cut out to
reset. Use lighter cutting action.
2. Check blade and remove
any debris.
3. Charge battery.
1. The hedge trimmer has jammed.
2. Check blade and remove
any debris.
17