Related Manuals for Gtech HT01
Summary of Contents for Gtech HT01
- Page 1 Safety and Instruction Manual for cordless hedge trimmer HT01 www.gtechonline.co.uk HT01_UKManual2010v3.indd 1 25/03/2010 10:02...
-
Page 2: Table Of Contents
Introduction It is my pleasure to introduce the HT01 cordless hedge trimmer from Gtech. Designed, patented and developed in the heart of England we hope that you find this product helps you effortlessly stay on top of garden chores. If you have any queries or comments about your new garden tool, we would love to hear from you. -
Page 3: Safety Information
Important safety information IMPORTANT: FOR YOUR OWN • Do not abuse the cord. Never use the cord for SAFETY AND BYSTANDERS READ carrying, pulling or unplugging the power tool. THE INSTRUCTIONS BEFORE Keep cord away from heat, oil, sharp edges or OPERATING THE MACHINE. - Page 4 • Do not overreach. Keep proper footing and instructions, taking into account the balance at all times. This enables better control working conditions and the work to be of the power tool in unexpected situations. performed. Use of the power tool for operations different from those intended •...
- Page 5 • Keep any cables away from the cutting • Keep hands and feet away from the cutting area. During operation the cable may be means at all times, and especially when hidden in shrubs and can be accidentally switching on the motor. Warning: the be cut by the blade.
-
Page 6: Part Location
Warning label descriptions Read instruction General hazard Guaranteed sound manual before safety alert. power level: 95dB(A) Note: Measured noise values determined Do not use in rain Wear eye protection according to 2000/14 EC (1.60m height, or leave outdoors when using this 1.0m distance away). -
Page 7: Battery Charging And Recharging
Battery charging & recharging WARNING: if the battery is damaged in any way do not attempt to charge it and replace it immediately. Before use check the power supply and charger cables for signs of damage or ageing. A damaged charger cable can increase risk of fire or electric shock. The battery has to be removed from the product to charge it. To disconnect the battery pack, grip the battery connector and slide it off the battery pack. Connect the charging jack into the socket on the battery pack. Plug the charger into a suitable electrical socket and switch on. From flat the battery requires 15 hours to fully charge. -
Page 8: Assembly
Assembly Locate the visor onto the cutting head. Fit the screw and secure in place. Telescopic tube adjustment The telescopic tube length on the trimmer can be adjusted, allowing you to reach difficult places without the use of a ladder. WARNING: switch off the motor before adjusting the telescopic tube. Do not attempt to adjust the telescopic tube while the blades are moving. -
Page 9: Cutting Head Adjustment
Cutting head adjustment The cutting head of the trimmer can be adjusted to different angles, allowing you to comfortably cut in different positions and conditions. WARNING: switch off the motor before adjusting the head. Do not attempt to adjust the head while the blades are moving. Grip the head of the trimmer and press and hold the button on the side marked ‘PUSH’ Rotate the head to the desired angle. -
Page 10: Using Your Trimmer
Cut thick or dense foliage in stages with several lights cuts as this will help reduce the load on the motor. The maximum thickness of a branch that the HT01 will cut is 8.0mm. This may be reduced with certain bush and shrub types. - Page 11 Starting and Stopping: The handle is designed with a safety button to prevent accidental starting. To start the trimmer: Remove the Blade Cover. Press and hold the safety button located on either side of the handle, then press the start trigger. Continue holding the start/stop trigger and release the safety button. The trimmer will be on for as long as the trigger is pressed.
-
Page 12: Care And Maintenance
Care and maintenance CAUTION : ALWAYS DISCONNECT THE BATTERY AFTER USE AND BEFORE CARRYING OUT ANY SERVICING OR MAINTENANCE Wear protective gloves before handling the blade. To ensure long and reliable service, carry out the following maintenance regularly: Check for obvious defects such as loose, dislodged or damaged blades, loose fixings and worn or damaged components. Check that covers and guards are undamaged and correctly fitted. -
Page 13: Troubleshooting
Troubleshooting PROBLEM POSSIBLE REASON POSSIBLE SOLUTION 1. Recharge battery 1. Battery flat 2. Check connection of cord Trimmer fails to operate 2. Cord not connected to battery pack 3. Switch in handle will ‘click’ if 3. Faulty switch operating properly 1. Lack of lubrication 1. -
Page 14: Battery Disposal
It is recommended to dispose of the complete battery pack at a recognised recycling facility. Technical specification Charger output: 15V DC 160mA HT01 cordless hedge trimmer Charger type: AD-1516-BS8P Unit operating cycle with full battery: Sound Pressure Level: 69.96dB(A) -
Page 15: Warranty Information
In Guarantee: Please retain your receipt as proof of purchase. In the rare and unfortunate event of your Gtech product being faulty, please accept our apologies and we will aim to remedy the problem as fast as possible once brought to our attention. However please be... -
Page 16: Declaration Of Conformity
We, manufacturer/importer Grey Technology Ltd Units 1&2 Cupola Court Spetchley Worcester WR5 1RL declare that the product HT01 Cordless Hedge Trimmer complies with the essential health and safety requirements of the following directives: 2004/108/EC EMC Directive. 2006/42/EC Machinery Directive 2006/95/EC Low Voltage Directive...
Need help?
Do you have a question about the HT01 and is the answer not in the manual?
Questions and answers