Viavito Satori Owner's Manual page 20

4. Recovery mode
After exercising, keep holding the
handgrips and press the RECOVERY
button. All functions will stop displaying
except for TIME, which will start counting
down from 00:60 to 00:00 (drawing 20).
The screen will display your heart rate
recovery status with the F1, F2...
Drawing 20
NOTE:
• When there is no input signal for 4
minutes, the console will enter power
saving mode (drawing 22). All settings
and exercise data will be stored until
the user start exercising again.
Drawing 22
20
to F6 (drawing 21). F1 is the best, F6 is
the worst. Press the RECOVERY button
again to return to the main display.
During the recovery time, press
RECOVERY again and the console
will go back to the previous page.
Drawing 21
• If the console behaves abnormally,
please unplug the mains adaptor
and plug it back in again.
4.1. Error Messages.
*The screen displays "- - - - -" "- - - - -" : Not
holding the hand pulse sensor correctly.
*E-1 – There is no heart rate signal input
detected.
*E-4 – Occurs when FAT% is below 5 or
exceeds 50 and BMI result is below 5 or
exceeds 50.
www.viavito.com