YASKAWA SGD7S Product Manual page 593

Parameter
Name
No.
Output Signal Selec-
2
tions 4

n. X Reserved parameter (Do not change.)
 
n. X Reserved parameter (Do not change.)
/PM (Preventative Maintenance Output) Signal Allocation
Pn514
 
n. X

n.X Reserved parameter (Do not change.)
Setting Setting
Range Unit
0000 to
–
0666
0 Disabled (the above signal output is not used).
1 Output the signal from the CN1-25 or CN1-26 output terminal.
2 Output the signal from the CN1-27 or CN1-28 output terminal.
3 Output the signal from the CN1-29 or CN1-30 output terminal.
4 Output the signal from the CN1-37 output terminal.
5 Output the signal from the CN1-38 output terminal.
6 Output the signal from the CN1-39 output terminal.
14.1 List of Parameters
14.1.2 List of Parameters
Continued from previous page.
Default Applicable When
Setting Motors Enabled
After
0000 All
restart
Continued on next page.
Classi- Refer-
fication ence
Setup –
Reference
page 9-17
14
14-29