Troubleshooting - Siemens HiPath3550 Quick Start Manual

7. Troubleshooting

The tools used for debugging include network sniffer applications (such as Ethereal) and AudioCodes'
Syslog protocol.
The Syslog client, embedded in the AudioCodes gateways (MP-11x, Mediant 1000, and Mediant 2000),
sends error reports/events generated by the gateway application to a Syslog server, using IP/UDP
protocol.
To activate the Syslog client on the AudioCodes gateways:
1. Set the parameter Enable Syslog to 'Enable'.
2. Use the parameter Syslog Server IP Address to define the IP address of the Syslog server you
use.
Note: The Syslog Server IP address must be one that corresponds to your network environment in
which the Syslog server is installed (for example, 10.15.2.5).
Step 2
Step 1
42