1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Conference System
  5. OCI600
  6. User manual

Siemens OCI600 User Manual

Central communication unit
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Central Communication Unit OCI600
User Manual
Edition 3.0
Software version 3.7 and higher
74 319 0002 0 c
Building Technologies
CE1U2529E
HVAC Products
15.07.2005

Advertisement

Table of Contents
loading

Related Manuals for Siemens OCI600

Summary of Contents for Siemens OCI600

  • Page 1 Central Communication Unit OCI600 User Manual Edition 3.0 Software version 3.7 and higher 74 319 0002 0 c Building Technologies CE1U2529E HVAC Products 15.07.2005...
  • Page 2 2/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products 15.07.2005...

  • Page 3: Table Of Contents

    Setting up the QAB30.600 temperature sensors 30 3.3.4 Setting up the DOE4IN Batibus input modules ...31 3.3.5 Setting up the DOE4RE Batibus relay modules..31 Setting up the OCI600 with the ACS7.. software 32 3/72 Building Technologies User Manual OCI600 74 319 0002 0 c...
  • Page 4 Integrating the DOE4IN Batibus input modules into the OCI600 ..........38 4.2.5 Integrating the DOE4RE Batibus relay modules into the OCI600 ..........39 4.2.6 Parameterizing the digital inputs of the OCI600 .41 4.2.7 Parameterizing the digital outputs of the OCI600 ................43 4.2.8 Parameterizing the logical inputs......44 Notes on saving and loading a configuration ..46...
  • Page 5 Remedy in the event of problems with the LPB ..67 General note............67 Selected phenomena and proposals for remedy 67 Technical data ............69 5/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Contents 15.07.2005...
  • Page 6 6/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Contents 15.07.2005...

  • Page 7: Overview

    1 Overview 1.1 Basics The OCI600 central communication unit is used for the su- pervision and remote operation of one or several heating and/or ventilation plants. It serves as an interface between the ACS7... software and the heating or ventilation plant whose devices are interconnected via LPB (Local Process Bus).

  • Page 8: Internal Inputs / Outputs And Connection Choices (Lpb)

    1.3 Internal inputs / outputs and connection choices (LPB) Internally, the OCI600 central communication unit has: • 4 digital inputs • 2 digital outputs The following types of devices can be connected via LPB: • Maximum 16 LPB controllers (refer to section “1.2 Device combinations“)

  • Page 9: Operating Elements Of The Central Communication Unit

    To access the cable strips inside the unit, undo the sealable fixing screw and open the housing (also refer to subsection “3.1.3 Electrical installation“). 9/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Operating elements of the central communication unit 15.07.2005...

  • Page 10: Underside Of The Unit

    8 Jack for the modem’s power supply 9 RS-232 port (25 pins) 10 Memory card 11 Knockout holes for cable entry 10/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Operating elements of the central communication unit 15.07.2005...

  • Page 11: Buttons And Display

    2.2 Buttons and display 2.2.1 General The settings made on the OCI600 can be read and changed with the help of the unit’s display and buttons. 2529O64 FILE 1 Information address 2 Numeric value of input or read function 3 Operating card number...

  • Page 12: Using The Buttons

    All highlighted variables (grey background) on the oper- ating cards can only be read. Values with a white back- ground can also be changed 12/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Operating elements of the central communication unit 15.07.2005...

  • Page 13: Reading And Setting Functions

    Time of day and date Operating card 1 of the OCI600 only contains read functions. Values cannot be changed here. Time of day Here, you can read the time of day of the OCI600. Date Here, you can read the current date. 2.3.1.2...
  • Page 14 DHW sensors DHW temperature / thermostat 1, error DHW temperature / thermostat 2, error DHW flow temperature, sensor error 14/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Operating elements of the central communication unit 15.07.2005...
  • Page 15 LPB short-circuit or no bus power supply LPB, address collision BSB wire, short-circuit BSB wire, address collision BSB radio communication error PPS, short-circuit 15/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Operating elements of the central communication unit 15.07.2005...
  • Page 16 Flow temperature heating circuit 1 not reached Flow temperature heating circuit 2 not reached Flow temperature DHW not reached 16/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Operating elements of the central communication unit 15.07.2005...
  • Page 17 External components Fan speed threshold not reached Maximum fan speed exceeded Refer to User Manual of thedevice causing the 17/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Operating elements of the central communication unit 15.07.2005...
  • Page 18 Refer to User Manual of the device causing the error 200-221 Error messages "Non-ALBATROS devices" Fire / smoke alarm Frost alarm Supply air temperature, sensor error 18/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Operating elements of the central communication unit 15.07.2005...
  • Page 19 B109 sensor error Flow sensor for yield measurement, error Return sensor for yield measurement, error Swimming pool sensor, fault 19/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Operating elements of the central communication unit 15.07.2005...

  • Page 20: Operating Card 2 = Diagnostics

    Operating card 2 of the OCI600 only contains diagnostic val- ues. You cannot change any of them. SW Version Here, you can view the software version of the OCI600 cen- tral communication unit. LPB Communication Version Here, you can see the LPB version supported by the com- munication interface.
  • Page 21 CONNECT 2400 Connection 2400 CONNECT 1200/75 Connection 1200/75 CONNECT 75/1200 Connection 75/1200 CONNECT 1200/V.23 Connection 1200/V.23 CONNECT 9600 Connection 9600 21/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Operating elements of the central communication unit 15.07.2005...

  • Page 22: Operating Card 3 = Installation

    2.3.3 Operating card 3 = Installation Display 3 corresponds to operating card 3 of the OCI600 and assists in commissioning or setting up the central communi- cation unit. The values displayed can be changed with the buttons on the right.
  • Page 23 Communication RS-232 Here, the type of communication unit connected to the OCI600 is to be selected. The following choices are available: Minitel local; France only (default setting) Modem PC local no alarms PC local with alarms Memory Card The memory card is used for saving Offline Trend data. For more detailed information about the “Offline Trend“...

  • Page 24: Local Setting Up

    H1 1 Devices H1, H2 Alarm device P1...P4 Devices with potential-free output Central communication unit OCI600 Connection terminals of the OCI600 G1, G2 Operating voltage AC 24 V DB, MB LPB (data, ground) P1...P4, M Status or alarm inputs H11, H12...

  • Page 25: Electrical Installation

    3.2 Switching on the central bus power supply Procedure Switch on the central bus power supply to the OCI600. If there are several OCI600, select one of them. The bus power supply to the OCI600 is to be activated on line number 7 of operating card 3.

  • Page 26: Setting Up The Individual Bus Users

    For all controllers, set parameter Bus power supply on the relevant operating line to “Off” Type of Operating line for bus power controller supply RVP3.../RVL4... RWI65.01 RWI65.02 RVD2... RVP5... RVA... 26/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Local setting up 15.07.2005...

  • Page 27: Setting Up The Aew2.1 Pulse Adapter

    On the OCI600, a maximum of 6 pulse adapters with 2 inputs can be parameterized With the OCI600, 3 pulse adapters with 2 inputs or 6 pulse adapters with 1 input can be used When using addresses 124, 125 and 126, it is only inputs “Counter 1 (P1–M)”...
  • Page 28 Addresses 1...48 must not be used because they are in the range of the apartments with the OZW30. If several OCI600 are connected to the LPB, the same condi- tions apply to the assignment of addresses. An address can only be assigned once.
  • Page 29 Use the LED on the pulse adapter to check wiring: LED must be steady on. Ensure that the subaddress of the pulse adapter is al- ways left on 1 when used in connection with the OCI600 (AZW30 line number 92). If required, enter the device number (AZW30 line num- ber 01).
  • Page 30 When setting up the temperature sensors, proceed as fol- lows: Apply power. Fit address plugs 13 and 15 if only 1 OCI600 is con- nected to the bus. Fit address plugs 125 and 127 if, in addition, an OZW30 is connected to the bus.

  • Page 31: Setting Up The Qab30.600 Temperature Sensors 30 Setting Up The Doe4In Batibus Input Modules

    The device number with the knob at the bottom (recommendation: 1, 5, 9 and 13) Connect the module to the LPB. Check the connection: In normal operation, the orange LED flashes. 31/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Local setting up 15.07.2005...

  • Page 32: Opening The Connection And Starting Up The Software

    3 = PC local with alarms 4.1.2 Prerequisite For setting up the OCI600, the user must have logged in on user level “Service“ or “Administrator“. For additional infor- mation, refer to Online Help of your ACS7... software, menu item Extras > Password…...

  • Page 33: Term "Data Point" In Acs7

    For information about the meaning of the symbols, refer to Online Help of your ACS7... software under “Displaying data points in Popcard“. 33/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Setting up the OCI600 with the ACS7.. software 15.07.2005...

  • Page 34: Integration And Parameterization Of The Devices

    “Device n segment number“. Note: In this User Manual, index “n“ denotes a consecu- tive number (here controllers 1 to 16). 34/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Setting up the OCI600 with the ACS7.. software 15.07.2005...

  • Page 35: Integrating The Aew2.1 Pulse Adapter Into The Oci600

    From the Applications > Popcard… menu, select oper- ating page “Counter module n“. Then, the right half of the 35/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Setting up the OCI600 with the ACS7.. software 15.07.2005...

  • Page 36: Integrating The Qab30.600 Temperature Sensors Into The Oci600

    When these preconditions are satisfied, make the settings in ACS7... the ACS7.. operating software: On the View menu, deactivate Consider dependen- cies. 36/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Setting up the OCI600 with the ACS7.. software 15.07.2005...
  • Page 37 On line “Temp module n input n measured value“, you can read the current temperature. Repeat steps 2 to 4 above for the second temperature module. 37/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Setting up the OCI600 with the ACS7.. software 15.07.2005...

  • Page 38: Integrating The Doe4In Batibus Input Modules Into The Oci600

    Both the devices and the segment number must agree with the settings made on the Batibus input modules. 38/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Setting up the OCI600 with the ACS7.. software 15.07.2005...

  • Page 39: Integrating The Doe4Re Batibus Relay Modules Into The Oci600

    “Relay module n na- me“, “Relay module n device number“ and “Relay mod- ule n segment number“ for each relay module. 39/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Setting up the OCI600 with the ACS7.. software 15.07.2005...
  • Page 40 7-day programs. For 1, 2 or 3 every day, 1 switch-on and 1 switch- off time can be defined. 40/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Setting up the OCI600 with the ACS7.. software 15.07.2005...

  • Page 41: Parameterizing The Digital Inputs Of The Oci600

    Procedure From the Applications > Popcard… menu, select operating page “Inputs OCI600“. The 4 digital inputs of the OCI600 are presented as a module to which a freely selectable name with a maximum of 16 cha- racters can be assigned.
  • Page 42 Alarm messages can be delivered to 4 different numbers in various combinations. Data point: Each input can be assigned to 1 of the 2 “Outputs OCI600“. “Input n relay“ 42/72 Building Technologies...

  • Page 43: Parameterizing The Digital Outputs Of The Oci600

    Procedure From the Applications > Popcard... menu, select operating page “Outputs OCI600“. The 2 digital outputs of the OCI600 are presented as a mod- ule to which a freely selectable name with a maximum of 16 characters can be assigned.

  • Page 44: Parameterizing The Logical Inputs

    A relay used in this way cannot simultaneously be controlled manually or by a 7-day program. Control via inputs has the highest priority. 4.2.8 Parameterizing the logical inputs Default The 4 “Logical inputs of the OCI600“ have the following de- meanings fault meaning: Input Meaning 1: Communication...
  • Page 45 From the Applications > Popcard… menu, select operating page “Log. inputs OCI600“. The 4 logical inputs of the OCI600 are presented as a mod- ule to which a freely selectable name with a maximum of 16 characters can be assigned. For each of the 4 logical inputs, edit the relevant values of the data points listed below.

  • Page 46: Notes On Saving And Loading A Configuration

    OCI600 where they are saved. Backup Using Application > Parameter settings…, it is possible to save and load the configurations of the OCI600 (and of all other devices that can be reached via LPB). Applications: •...

  • Page 47: Communication And Delivery Of Alarms

    Procedure From ACS Service – [Popcard], select operating page Passwords. Note: To do this, an online connection to the OCI600 is required. Enter the new numeric password under “Code No.“ (ma- ximum 7 digits starting with 0, e.g. 07845).
  • Page 48 If the password used for the software under Plant proper- forgotten ties… is different from the password active on the OCI600 and you do not know the latter, the plant must be reinitialized (reset). The reset is made by pressing buttons...

  • Page 49: Communication Via Rs-232 Port

    Standard null modem Link cable cable 25 pins 9 pins 25 pins 25 pins Female Female 49/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Communication and delivery of alarms 15.07.2005...

  • Page 50: Communication Via The Telephone Network

    If a telephone line cannot be laid, a GSM modem can be used. 50/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Communication and delivery of alarms 15.07.2005...

  • Page 51: Selection Of Modem And Provider

    HAYES-compatible to one another Modern fax machines should be downward-compatible and still support the “Group 3 fax protocol“ 51/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Communication and delivery of alarms 15.07.2005...
  • Page 52 In the case of an ISDN modem, UCP is used for SMS mes- sages, or TAP for SMS. TAP is used for pager messages. OCI600 does not support the original AT+ Protocol of GSM modems for sending SMS and pager messages.
  • Page 53 Type of message SMS Protocol UCP (Provider: KPN) Phone number n 653141414 or 653151515 Type of alarm Mobile phone (SMS) receiver 53/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Communication and delivery of alarms 15.07.2005...
  • Page 54 Telefonnummer n 740900108 • Numeric pager: (7E1) Type of alarm • Alphanumeric pager: 40 characters receiver (7E1) or 80 characters (7E1) 54/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Communication and delivery of alarms 15.07.2005...

  • Page 55: Operating Page "Modem

    5.3.3 Operating page “Modem“ Procedure Before connecting a modem to the OCI600, a number of set- tings must be made on operating page “Modem“. Make the following entries in the data points: Data point Analog / GSM ISDN (recom- mendation) Modem initiali- AT&FE0Q0V1X4...
  • Page 56 (e.g. Windows HyperTerminal) prior to connecting the mo- dem to the central unit: 56/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Communication and delivery of alarms 15.07.2005...

  • Page 57: Sending Alarms

    5.4.1 Sending alarms to the directly connected ACS7... Procedure On the OCI600, on line number 11 of operating card 3, select: 3 = PC local with alarms. On line number 08 of operating card 3, select: 4 = 9600 Baud.
  • Page 58 A phone number must also be selected in direct mode since otherwise no alarms can be delivered (e.g. phone number 1). 58/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Communication and delivery of alarms 15.07.2005...

  • Page 59: Sending Alarms To The Acs7

    Connect your modem to the OCI600 and check power supply and wiring to the OCI600 and the telecommuni- cation network. On the OCI600, on line number 11 of operating card 3, set the following parameter: 1 = communication via modem.

  • Page 60: Sending Alarms To Sms Receivers

    With modem: Note that in case of a modem connection, the line must be Either free to be able to receive a call from the OCI600. This means parameterization that you need to close the connection you opened for setting or sending alarms the parameters.
  • Page 61 SMS receiver and the extra information attached to the phone number of the selected TAP SMS telephone provider. The OCI600 limits the maximum number of characters to 80 however. So, with an SMS receiver using 160 characters and the information “00491712092522, 8N1, 160“...

  • Page 62: Sending Alarms To

    Procedure Make the following settings on operating page “Phone num- ber“ of ACS Service – [Popcard]: Data point Setting Phone number Plant phone number of OCI600 OCI600 is also displayed on alphanumeric and numeric pager (entry optional) Phone number n...
  • Page 63 The setting must be made in agreement with the standard of the pager and the extra information attached to the phone number of the selected TAP pager telephone provider. The OCI600 limits the maximum number of characters to 80 however. So, with a pager using 160 characters and the information “00491712092522, 8N1,...

  • Page 64: Sending Alarms To Fax Machines

    Make the following settings on operating page “Phone num- ber“ of ACS Service – [Popcard]: Parameter Setting Phone number Plant phone number of OCI600 OCI600 appears on the fax (entry optional) Phone number n Phone number of fax machine that shall output the message.

  • Page 65: 7-Day And Holiday Program For Sending Alarms

    Always on the central operator station Default state The software is supplied with all phone numbers activated during the entire week. 65/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Communication and delivery of alarms 15.07.2005...
  • Page 66 8 periods and then activate 1 of the 4 receivers when going on holiday. 66/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Communication and delivery of alarms...
  • Page 67 Note If you require additional information on engineering, or if you encounter major problems in connection with this subject, please contact your Siemens Service. Selected phenomena and proposals for remedy No bus voltage After a bus settling time of 3 seconds, there is no power on the bus.
  • Page 68 The OCI600 displays error message “141“ (LPB configura- “141“ tion not consistent). Possible causes: • It may take up to 12 minutes for the OCI600 to include the devices in the device directory • The address of at least 1 connected device is not cor- rectly set •...
  • Page 69 AC 24 V Status inputs (P1…P4) potential-free Perm. ambient temperature Transport and storage –25…+65 °C Operation 0…50 °C LPB data see CE1P2370E Weight 1.1 kg 69/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products Technical data 15.07.2005...
  • Page 70 ............... 9 Pager.................. 62 Provider ................51 RS-232 ................49 sending alarms ..............57 SMS..................60 Technical data ..............69 testing the alarms ............... 58 70/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products 15.07.2005...
  • Page 71 71/72 Building Technologies User Manual OCI600 74 319 0002 0 c HVAC Products 15.07.2005...
  • Page 72 Siemens Switzerland Ltd HVAC Products ARG600.EN Assembled in Switzerland *ARG600.EN* Siemens Switzerland Ltd © 2005 Siemens Switzerland Ltd Building Technologies Group Subject to change International Headquarters HVAC Products Gubelstrasse 22 CH 6301 Zug Tel. 41 41-724 24 24 Fax 41 41-724 35 22 www.sbt.siemens.com...

Table of Contents