Stable Running With Delay Time - Sanyo MIR-162 Service Manual

STABLE RUNNING WITH DELAY TIME

Table 2 shows one of applications.
operations in the sequence indicated in the table.
The example in the table is the delay time that is 30
minutes, the chamber temperature is 50
running time is 1 hour and the timer mode is Timer
Mode C.
Table 2: Basic operation sequence (Example: Chamber temperature; 50
Description of operation
1 Press the power key.
2 Press the delay timer key.
Press the delay timer key to reset
3
the delay time.
Set the delay time to 00:30 with the
4 digit shift key and the numeric
value shift key.
5 Press the delay timer key.
6 Press the call key.
Set the temp. to 50.0 and running
7 time to 01:00 with the digit shift key
and numeric value shift key.
Press the timer mode key to select
8
the time mode C.
9 Press the run/stop key.
Note:
If there is no need to change the set value in each setting mode, press the call key (CALL) to activate the
next mode.
If the unit runs every time, set the running time --:-- by pressing the numerical value shift key at the fourth
digit of the time indicator.
Press the Run/Stop key (RUN/STOP) when cancellation is necessary while running.
If you don't need the delay time, set the delay time 00:00.
If you need to change the set value, key operate after the unit stops.
When no key is pressed within 45 seconds, displayed number is memorized, setting is over and indicator
displays the current value.
15
Perform key
o
C, the
Delay time; 30 minuets, Running time; 1 hour, Timer mode; C)
Key operated
The current chamber temperature is displayed.
POWER
The current delay time is displayed.
DELAY
Reset the delay time.
DELAY
The current chamber temperature is displayed.
DELAY
The fourth digit of the indicator flashes.
CALL
By pressing the key, the timer mode C lamp is
TIMER
MODE
lighted.
The setting mode is finished and the unit runs.
RUN
STOP
- 38 -
o
50 C
30 min. 1 hour
o
C,
Indication after operation
Buzzer