Siemens SINUMERIK 840D Operator's Manual page 201

6
03.04
Sub-
routines
(子程序)
Network
Disk
drive
Compact
Flash Card
OEM
softkey
Standard
cycles
Manufact.
cycles
User
cycles
Memory
info
System
files
Definition
files
Operating
data
Clipboard
Machine manufacturer
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
An overview of all subprograms stored in the selected directory is
displayed.
Subprograms are processed in the same way as described for
"Process main programs".
These four softkeys (logical drive 1–3 and the OEM softkey) appear
only if the "network and disk drive management" option has been
enabled, e.g. as "Disk", "Network drive", "Compact Flash Card" (see
Chap. 9) or
e.g. OEM softkey (expand operator interface)
The standard cycles appear on the screen when you press the softkey
"Standard cycles".
Select softkey "Manufacturer cycles" to display a list of the cycles that
have been integrated by the manufacturer.
Select softkey "User cycles" to display a list of the user cycles that
you have added.
The total available/used memory is displayed.
You can access the following softkeys by pressing the ETC key:
"System files" (e.g. OSTORE1_SYF),
"Definition files" (e.g. GUD4_DEF),
"Operating files" (e.g. BD_TEA).
By pressing the softkey "Clipboard" you can display a list of the
programs/data stored in the clipboard.
These softkeys can be disabled in display machine data.
Please note information supplied by machine tool manufacturer!
Program Operating Area
6.3 Program basic display
6
6-201