Mac Information Configuration Example; Network Requirements; Configuration Procedure - HP 3100 Series Configuration Manual

MAC Information configuration example

Network requirements

As shown in
changes in Syslog messages to Host B through Ethernet 1/0/3. Host B analyzes and displays the
Syslog messages.
Figure 6 Network diagram

Configuration procedure

Configure Device to send Syslog messages to Host B (see Network Management and
1.
Monitoring Configuration Guide).
Enable MAC Information:
2.
# Enable MAC Information on Device.
<Device> system-view
[Device] mac-address information enable
# Configure MAC Information mode as Syslog.
[Device] mac-address information mode syslog
# Enable MAC Information on Ethernet 1/0/1.
[Device] interface ethernet 1/0/1
[Device-Ethernet1/0/1] mac-address information enable added
[Device-Ethernet1/0/1] mac-address information enable deleted
[Device-Ethernet1/0/1] quit
# Set the MAC Information queue length to 100.
[Device] mac-address information queue-length 100
# Set the interval for sending Syslog or trap messages to 20 seconds.
[Device] mac-address information interval 20
Figure 6, enable MAC Information on Ethernet 1/0/1 on Device to send MAC address
28