Clutch Cable Inspection And Adjustment; Clutch Cable Removal And Installation - Suzuki ltz 400 Service Manual

5C-2 Clutch:

Clutch Cable Inspection and Adjustment

Refer to "Clutch Inspection and Adjustment in Section
0B (Page 0B-13)".

Clutch Cable Removal and Installation

Removal
1) Loosen the cable adjuster lock-nut (1) and adjuster
(2).
2) Loosen the cable lock-nut (3) and remove the
adjuster (4).
3) Disconnect the clutch cable (5).
4
3
B933H25306002
B933H25306003
2
1
I933H1530003-01
5
I933H1530004-01
4) Move the fuel pump (6).
5) Remove the clutch cable bracket (7) and disconnect
the clutch cable (8).
6
6) Remove the fuel tank. Refer to "Fuel Tank Removal
and Installation in Section 1G (Page 1G-9)".
7) Remove the clutch cable as shown in the cable
routing diagram. Refer to "Hose and Cable Routing
Diagram in Section 4A (Page 4A-3)".
Installation
Install the clutch cable in the reverse order of removal.
Pay attention to the following point:
• Tighten the fuel pump mounting bolts to the specified
torque.
Tightening torque
Fuel pump mounting bolts (a): 10 N·m (1.0 kgf-m,
7.0 lb-ft)
• After install the removed parts, adjust the clutch cable
play. Refer to "Clutch Inspection and Adjustment in
Section 0B (Page 0B-13)".
I933H1530005-01
7
8
I933H1530006-01
(a)
I933H1530007-01