Table of Contents
Advertisement
Engine oil level
Four stroke engine oil is used in the engines in order to lubricate the timing bodies,
the bench bearings and the thermal group. An insufficient quantity of oil can seri-
ously damage the engine. In all four-stroke engines, a loss of efficiency in oil
performance and certain consumption should be considered normal. Consumption
can particularly reflect the conditions of use (i.e. when driving at 'full acceleration' all
the time, oil consumption increases). The replacement intervals provided for by the
maintenance programme are defined depending on the total content of oil in the en-
gine and the average consumption measured following standardised methods. In
order to prevent any problems, we recommend checking oil level more fre-
quently than indicated in the Scheduled Maintenance table or before setting off
on long journeys. The vehicle is, however, equipped with an oil pressure warn-
ing light on the instrument panel.
Engine oil level check (03_01, 03_02)
Every time the vehicle is used, visually inspect the level of the engine oil when the
engine is cold (after completely unscrewing the oil cap/dipstick). The oil level should
be somewhere between the MAX and MIN index marks on the level rod; «A»; while
the oil is being checked, the vehicle must be resting on its centre stand on an even,
horizontal surface.
If the check is carried out after the vehicle has been used, and therefore with a hot
engine, the level line will be lower; in order to carry out a correct check, wait at least
10 minutes after the engine has been stopped so as to get the correct level.
03_01
46
- Quick Links:
- Dashboard
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the LUM MP3 300 YOURBAN RL-NRL 2011 and is the answer not in the manual?
Questions and answers
Hello, when I turn on the ignition (without starting the engine) on my 2011 Mp3 300 Yourban engine, the temperature shows a maximum high (overheating). After starting the engine nothing changed. I've replaced the temperature sensor but the problem isn't solved. Please advise. I appreciate any help you can provide.
If the temperature gauge shows overheating on a 2011 Piaggio MP3 300 Yourban even after replacing the temperature sensor, possible causes include:
1. Low or no coolant in the system.
2. A fault in the cooling system (e.g., leak, blocked radiator, or failed water pump).
3. Electrical or wiring issues affecting the temperature gauge.
4. A dirty or blocked radiator grille reducing cooling efficiency.
It is recommended to check the coolant level and, if the level is normal, have the cooling system inspected at an Authorised Service Centre.
This answer is automatically generated