Change Your Tv's Input Selection - Frontier vantage User Manual

4 . Search by pressing the
device turns OFF (the selected mode key will flash once for
each press of the
key press to allow your device enough time to respond .
POWER
5 . Press the
device back on .
Note: If the device does not turn off and you have searched all
available codes, the selected mode key will flash eight times.
If this happens, please start over.
If the device does not turn on, you may have pressed the
SCAN/FF
key too many times. Press the
to scan backwards and test the
VOLUME
6 . Check
SCAN/FF, FWD
of the keys, press the
you find a code that will operate all the functions properly .
7 . Press the ENTER
appropriate mode key will give a long flash, indicating
successful programming .
Note: If the programming is interrupted or inactive for more than
30 seconds, the mode keys will flash eight times. This indicates
the remote has left the programming mode and returned to
normal operation without saving any changes.
If you have an integrated or combination unit such as TV-DVD,
TV-DVD-VCR, etc., each component of the unit may need to be
programmed separately by using the mode keys. For instance,
for a TV-DVD, search for the device code of TV and program into
the TV mode key, then search for the device code of DVD and
program into the DVD mode key.
Want more help? Check the remote's user manual provided
at installation, or watch Help On Demand on TV: Press MENU,
select Help, then Help On Demand to see all program titles .
Change Your TV's Input Selection to Match Its Video Source
If you're unable to see TV programs on your screen, first try
pressing the TV/VIDEO
change from Video 1 to Video 2 or Video 3 . These separate
video inputs (Video 1, Video 2 and Video 3) must match the
SCAN/FF key repeatedly until the
SCAN/FF key) . Pause briefly between each
button on the remote control to turn the
POWER
and MUTE . Do not test using REW/SCAN,
or EXIT . If there is any problem with any
SCAN/FF
button and search until
key to save the programming . The
button on your remote control to
Visit Frontier.com for more information
REW/SCAN
key
button again.
41