Monitoring Network Events And Status; Purpose; Commands; History - Enterasys b5 Manual

Monitoring Network Events and Status

Monitoring Network Events and Status

Purpose

To display switch events and command history, to set the size of the history buffer, and to display
and disconnect current user sessions.

Commands

For information about...

history

show history
set history
ping
show users
disconnect
show netstat
history
Use this command to display the contents of the command history buffer. The command history
buffer includes all the switch commands entered up to a maximum of 100, as specified in the set
history command ("set history" on page 14‐15).
Syntax
history
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the contents of the command history buffer. It shows there are
five commands in the buffer:
B5(su)->history
1 hist
2 show gvrp
3 show vlan
4 show igmp
5 show ip address
14-14 Logging and Network Management
Refer to page...
14-14
14-15
14-15
14-16
14-16
14-17
14-17