Access Code - Motorola nvg589 Administrator's Hanbook

Link: Access Code
Access to your Gateway is controlled through an account named Admin. The default Admin password for your
Gateway is the unique Access Code printed on the label on the side of your Gateway.
As the Admin, you can change this password to a different one of your own choosing between 8 and 20 characters
long. The new password must also include two characters from any these categories: alpha, number, and special
characters.
Example: "fru1tfl13s_likeabanana"
Use New Access Code
Enter your Old Access Code, your New Access Code, and click the button. The new
Access Code takes effect immediately.
Use Default Access Code
You can always return to the original default password by clicking the button.
35