Motorola nvg589 Administrator's Hanbook page 110

Administrator's Handbook
log message_string
Adds the message in the
loglevel [ level ]
Displays or modifies the types of log messages you want the Motorola Gateway to record. If you enter the
loglevel
command without the optional
log level setting.
You can enter the loglevel
you want to record. All messages with a level number equal to or greater than the level you specify are recorded.
For example, if you specify loglevel 3, the diagnostic log will retain high-level informational messages (level 3),
warnings (level 4), and failure messages (level 5).
Use the following values for the
◆
1 or low – Low-level informational messages or greater; includes trivial status messages.
◆
2 or medium – Medium-level informational messages or greater; includes status messages that can help
monitor network traffic.
◆
3 high
or – High-level informational messages or greater; includes status messages that may be significant
but do not constitute errors.
◆
4 warning
or
tion.
◆
5 failure –
or
netstat -i
Displays the IP interfaces for your Motorola Gateway.
netstat -r
Displays the IP routes stored in your Motorola Gateway.
nslookup [ hostname | ip_address ]
Performs a domain name system lookup for a specified host.
◆
The hostname argument is the name of the host for which you want DNS information; for example,
nslookup klaatu
◆
The
ip_address
DNS information.
ping [-s size] [-c count ] [ hostname | ip_address ]
Causes the Motorola Gateway to issue a series of ICMP Echo requests for the device with the specified name or
IP address.
◆
The hostname argument is the name of the device you want to ping; for example,
ping ftp.motorola.com
◆
The ip_address
a host using the specified name or IP address is active, it returns one or more ICMP Echo replies, confirming
that it is accessible from your network.
◆
-s
The size argument lets you specify the size of the ICMP packet.
◆
-c
The count argument lets you specify the number of ICMP packets generated for the ping request. Values
greater than 250 are truncated to 250.
110
message_string argument to the Motorola Gateway diagnostic log.
level
command with the
level argument:
– Warnings or greater; includes recoverable error conditions and useful operator informa-
Failures; includes messages describing error conditions that may not be recoverable.
.
argument is the IP address, in dotted decimal notation, of the device for which you want
.
argument is the IP address, in dotted decimal notation, of the device you want to locate. If
argument, the command line interface displays the current
level argument to specify the types of diagnostic messages