Programming (Speed Limiter); Exceeding The Programmed Speed; Return To Normal Driving; Speed Limiter Operating Fault - PEUGEOT 207 2008 Owner's Manual

Programming
Turn dial 1 to the "LIMIT" position:
the speed limiter mode is selected
but is not switched on (OFF).
You do not have to switch the speed
limiter on in order to set the speed.
Set the speed value by pressing button 2 or 3 (e.g.: 70 mph
(110 km/h).
You can then change the programmed speed using but-
tons 2 and 3 :
- by + or - 1 mph (km/h) = short press,
- by + or - 5 mph (km/h) = long press,
- in steps of + or - 5 mph (km/h) = maintained press.
Switch the speed limiter on by pressing button 4 .
Switch the speed limiter off by pressing button 4 : the display
Switch the speed limiter back on by pressing button 4
again.

Exceeding the programmed speed

Pressing the accelerator pedal to exceed the programmed
speed will not have any effect unless you press the pedal
past the point of resistance .
The speed limiter is deactivated temporarily and the pro-
Returning to the programmed speed, by means of intention-
al or unintentional deceleration of the vehicle, automatically

Return to normal driving

Turn dial 1 to the "0" position: the speed limiter mode is
deselected. The display returns to the distance recorder.
Operating fault
In the event of a speed limiter mal-
function, the speed is cleared result-
PEUGEOT dealer to have the system
checked.
!
On a steep descent, the speed lim-
iter will not be able to prevent the
vehicle from exceeding the pro-
grammed speed.
To avoid any risk of jamming of the
pedals:
- ensure that the mat is posi-
tioned correctly,
other.
119