Command Line Interface Overview; Command Modes; Cli Shortcuts; Table 1-6. Command Modes - ADTRAN Total Access 5000 Deployment Manual

Total Access 5000 Business Services Deployment Guide

Command Line Interface Overview

This section details the following information:
• Command Modes
• CLI Shortcuts
• CLI Error Messages
• CLI Input Descriptions

Command Modes

The Total Access 5000 CLI has three command modes, Basic, Application, and Enable. Each
mode supports a specific set of commands. For example, all interface configuration
commands are accessible only through the Enable mode. Table 1‐6 shows a brief description of
each command mode.
Mode
Basic
Enable
Application

CLI Shortcuts

Use the CLI shortcuts to help configure the product. Table 1‐7 provides a list of the CLI
shortcuts.
1-14

Table 1-6. Command Modes

Access by...
Beginning a session
Entering Enable mode while
in the Basic mode as follows:
>enable
Performing a common func‐
tion with a reduced set of
commands
Prompt With this mode...
> Display system information and
show status or statistics
# Manage running configurations,
enter any configuration modes, and
view security settings
# Copy system provisioning and exe‐
cute standard test procedures
65K510DEP08-1A