Pausing Or Restarting; Changing Cycles, Options And Modifiers - Samsung 592-29336 Owner's Manual

Pausing or Restarting

1. To pause the washer at any time, press the Start/Pause
button.
2. To continue the cycle, press the Start/Pause button.
Starting your Washer and Washing clothes using the cycle
selector
Your new washing machine makes washing clothes easy. When
you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Press the Power button.
2. Open the lid.
3. Load the articles of clothing one at a time loosely into the
drum, without overfilling it.
4. Add liquid (or powder) detergent, softener, and/or bleach (if
necessary) to the appropriate compartments.
5. Close the lid.
6. Use the Cycle Selector to select the appropriate cycle
according to the type of material.
7. At this time, you can control the wash temperature, the
number of rinse cycles, the spinning speed, and the delay time
by pressing the appropriate option button.
8. Press the Start/Pause button on the Cycle Selector and
the wash will begin. The process indicator will light up and the
remaining time for the cycle will appear in the display.
Pause Option
When the Garment + LED is on, you can add laundry items to or
remove laundry items from the wash.
To remove or add laundry items when the Garment + LED is on,
follow these steps:
1. Press the Start/Pause button to unlock the lid.
 The lid cannot be opened when the water is too HOT.
2. Remove or add laundry items.
3. Close the lid, and then press the Start/Pause button to restart
the wash.
20
F900A WASHER_KENMORE_USER MANUAL_592-29336_DC68-03133N-01_EN.indd 20

Changing Cycles, Options and Modifiers

Not all Options are available with all Cycles.
Cycles and Options can be changed anytime before START is
selected. Water will drain and new cycle will begin.
To stop a cycle and select a new cycle
1. Press the Start/Pause button.
2. Select desired cycle.
3. Select the desired OPTIONS.
4. Press the Start/Pause button to restart the washer at the
beginning of the new cycle..
To change Options after the cycle has started
1. Press the Start/Pause button.
2. Select the desired OPTIONS. If the option is not available, the
machine will beep.
3. Press the Start/Pause button to continue the cycle.
To cancel a cycle completely
1. Press the Power button.
2. Select SPIN ONLY.
3. Press the Start/Pause button.
4. Water will begin to drain away from the machine.
5. When draining is complete, the door will unlock and then
items can be removed from washer.
2015/12/15 16:51:42