Central door locks*
E00300801504
NOTE
l
Each of the doors can be locked or unlocked
independently by using the inside lock knob.
l
Repeated continuous operation between lock
and unlock could activate the central door
locking systems built-in protection circuit
and prevent the system from operating. If
this occurs, wait about 1 minute before oper-
ating the inside lock knob or the key.
All of the doors can be locked and unlocked as de-
scribed hereafter.
Driver's door with key
Turn the key in the driver's door towards the front
of the vehicle to lock the doors and towards the
rear of the vehicle to unlock the doors.
1- Lock
2- Unlock
Driver's door with inside lock knob
Set the inside lock knob on the driver's door to-
wards the front of the vehicle to lock the doors. Set
it towards the rear of the vehicle to unlock the doors.
1- Lock
2- Unlock
Unlocking doors using selector lever
(vehicle with keyless entry system)
It is possible to unlock all of the doors using the se-
lector lever by placing in the "P" position while the
ignition switch is in the "ON" position.
OCRE12E1
Locking and unlocking
NOTE
l
The vehicle is shipped from the factory with
a setting established such that the doors are
not unlocked when the selector lever is
placed in the in the "P" position with the ig-
nition switch in the "ON" position. If you
wish to change the setting such that the doors
are unlocked, contact your MITSUBISHI
MOTORS Authorized Service Point.
1
1-07
Need help?
Do you have a question about the L200 and is the answer not in the manual?
Questions and answers