Front Case Assy (506PE)
3
1
Remove the four screw rivets.
2
Remove the front case Assy (506PE).
When only the front case assy (506PE) is to
be removed
The front case assy (506PE) can be removed without removing
the rear case (506) beforehand. Remove the two screws shown
below:
Rear case (506)
1
2
-1
Note when the front case assy (506PE) is to
be reattached
Be sure to align the front case assy (506PE) with the plasma
section so that the some projections (paws) on the front case assy
go through the corresponding holes in the plasma section and
they fit flush and snugly together. If not, there will be a gap.
OK
Front case Assy (506PE)
Rear case (506)
58
1
1
2
-2
Front case Assy (506PE)
NG
Front case Assy (506PE)
Rear case (506)
1
E