Installing The User Wiring And Tubing Newly - Yamaha YK250XGC Installation Manual

7.
Use the user wiring and tubing in the machine harness as much as possible by considering the durability of
the machine harness.
If the user wiring and tubing incorporated into the machine are insufficient, add new user wiring and tubing
using cable ties.
The following shows the outside diameters and quantities that can be added by considering the durability of
2
the machine harness.
YK250XGC(P), YK350XGC(P), YK400XGC(P),
YK500XGLC(P), YK600XGLC(P)
2-14

Installing the user wiring and tubing newly

Installing the user wiring and tubing newly

Clamp the user wiring and tubing with minimal cable tie quantity
so that the additional signal lines and tubes do not deviate.
If the clamp is too strong, the machine harness may have faulty wiring.
Machine harness
Air tube
Signal line
Robot model
Cable tie
Signal line outside diameter
φ D (mm) × quantity
φ6 × 1 pc.
23215-HM-00
Tube outside diameter
φ d (mm) × quantity
φ4 × 3 pcs.