Answerback Concealed; Communication Answerback Dialog Box - Digital Equipment VT520 Programming Manual

Figure 2–21 Communication Answerback Dialog Box
Control characters are displayed using the CRM font. Pressing
return character in the Answerback message. Pressing
cursor in the Answerback text field moves to the OK button.
The current Answerback message is displayed in the answerback dialog
box unless Answerback concealed is selected. In this case, the previous
Answerback message is not shown. Choosing the OK button to enter a new
Answerback message clears the Answerback concealed check box.

2.13.16 Answerback Concealed

Changes to this field take effect immediately. The factory default is disabled.
If disabled, the Answerback message is visible in Set-Up. If enabled, the message
is not visible and the text "<concealed>" replaces the message. The only way to
return this field to disabled (visible) is to enter a new message.
2.13 Communication Menu
enters a
Return
+
with the highlighting
Set-Up 2–51
Set-Up