Context Sensitive Set-Up Features - Digital Equipment VT520 Programming Manual

Set-Up
2.1 Entering Set-Up
Table 2–2 Context Sensitive Set-Up Features
Menu Item
Session .
Pages per session Page
memory allocation
Display .
Lines per screen
Lines per page
Cursor direction
Energy saver
Overscan
Color .
ASCII color mode, Reverse
and blank attributes, and
Intensity attributes
Alternate text colors...
Select color mode
Terminal type .
Terminal ID to host
= 7-bit NRCS characters
ASCII emulation .
TVI page-flip
Keyboard . Key encoding .
Character, Scan code and
Key position
Data processing keys
Map PC keyboard to VT
Communication .
Port select Comm3
Half duplex
Transmit flow control .
DSR and Both
Receive flow control .
DTR and Both
Modem .
Disconnect delay and
Modem speed
Printer .
Serial print speed,
2-way communication,
Transmit flow control,
Receive flow control, Word
size, Parity, and Stop bits
DEC/ISO char sets
PC character sets
Print mode . Controller
2–4 Set-Up
Dimmed when . . .
Page selection exceed the number of unassigned
pages available.
Sizes are not available based on the current page
memory allocation.
WYSE is selected; use ASCII emulation . Data
lines and Pages.
Keyboard language is not Hebrew.
CRT saver = never is selected.
Terminal is a color terminal.
Emulation mode is set to other than an ASCII
terminal emulation.
Select color mode is other than Alternate color.
Terminal type . Emulation mode is other than a
VT or SCO console.
Terminal type . Emulation mode is other than a
VT or SCO console.
Emulation mode is set to VT100/VT52; or
Communication . Word size is 7-bits; or no
8-bit NRC set exists for the keyboard language.
Terminal type . Emulation mode is set to VT or
SCO console.
Terminal type . Emulation mode is other than
TVI.
ASCII emulation is selected, or a PC keyboard is
connected.
A PC keyboard is connected.
The keyboard is not a PC keyboard.
Comm3 is selected as a communications port. (It
can be either a comm port or a printer port but not
both.)
The host Communication . Port select is set to
S1=comm2.
The Modem . Enable modem control is selected.
The Modem . Enable modem control is selected.
The Modem . Enable modem control is not
selected.
The Communication . Port select is set to one of
the Print = parallel selections.
IBM ProPrinter is selected.
DEC ANSI printer is selected.
Display . Show control characters is selected.