Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for John Guest jgstat2w
Summary of Contents for John Guest jgstat2w
- Page 1 Quick Set-up Guide...
-
Page 2: Table Of Contents
Contents Box contents: Quick Set-up Guide Quick Set-up Guide Fixing screws JGSTAT2W JGSTAT2B (White) (Black) Quick Set-up Guide: Icons used in this guide: • Box contents Safety • Introduction • Product compliance • Terminal connections Important info • Model pre-sets •... -
Page 3: Introduction
Product compliance & safety information Introduction. Product Compliance. Thank This product is CE compliant and meets purchasing one of our Speedfit Aura the following European Directives: 230V Thermostat models. To use all of RoHS2 2011/65/EU, Electro- the Thermostat features, the optional Magnetic Compatibility directive communications cables are required. - Page 4 Product compliance & safety information These instructions are applicable to the Aura models stated on the front cover of this Quick Set-up Guide only. Warning. This product must be 230 AC fitted by a competent person. Installation must comply with the guidance, standards regulations applicable to the...
-
Page 5: Terminal Connections
Terminal connections Understanding the terminal connections on your thermostat. Rear of thermostat unit Live, Neutral and Switch Live Group communications cable Sensor / Probe terminals JGSTAT2 Quick Set-up Guide... -
Page 6: Model Pre-Sets
Model pre-sets The enclosed unit has been pre-set to function as a standalone Programmable Room Thermostat (PRT). On connection to mains power, the unit will display the following start-up sequence: The unit can also function as a Group Control Thermostat, a Group Thermostat or a Hot Water Timer. -
Page 7: Configuration Options
Configuration options A Group set up will consist of 1 Master and up to 7 digital thermostats. Each thermostat will have its own temperature control of a room but share a common time programme that will be dictated by the Group Master thermostat. Each digital thermostat will join the group when put into (Automatic) or will leave the group and become a stand alone manual (temperature only) digital thermostat when moved out of (Automatic). -
Page 8: Customising From Default Configurations
Customising from default configurations If any other configuration is needed then the thermostat must first be put into set up mode. In order to do this follow the instructions below. Press and hold bottom 3 buttons until the Using scroll through the numbers to above screen is shown. -
Page 9: Setting Device Configuration
Setting device configuration SO 1 (Set-up Menu 1) to select the type of thermostat you want. 0: Is to select a Programmable Room Thermostat or Group Master (time and temperature). 1: Is to select a Digital (temperature only) Thermostat 2: Is to select a Hot Water Timer (time control only) Once you have made your selection press CONFIRM The screen will now scroll to... -
Page 10: Setting Device Communication
Setting device communication SO 3 (Set-up Menu 3) S 03 (Set-up menu 3) is where you will confirm if the optional Command / Communication cable has been used. Use to select the option you want. 0: Not for the UK. This option is for Heat / Cool with the optional Command Cable fitted. -
Page 11: Speedfitufh.co.uk
Horton Road, West Drayton, Middlesex UB7 8JL, England. Tel: 01895 449233 Fax: 01895 420321 speedfitUFH.co.uk Technical Help Desk: 01895 425333 The above namestyles are all trademarks of John Guest International Limited. Z2105/457/0716 © John Guest International Limited 2016. All rights reserved.
Need help?
Do you have a question about the jgstat2w and is the answer not in the manual?
Questions and answers