Draining The Water Out Of The Boiler - Douwe Egberts Cafitesse 110 Service Manual

Cafitesse 100 Next Generation
A.2.2

Draining the water out of the boiler

WARNING: The water in the boiler is hot.
Beware of the risk of scalding.
Keep your hands and other
parts of your body away from
the hot water.
• Disconnect the dispenser from the power supply
system and close the water tap.
• Remove the cuptray and the driptray and open
the dispenser door.
• Remove the product pack from the cooling com-
partment and store it in the refrigerator.
Only if you serve a cafitesse 110 NG dispenser:
• Unscrew the 2 releasable rivets (1) on the cover
coolbox (2) (fig. 1)
• Pull down the cover fluid treatment (3) (fig. 2).
• Undo 2 releasable rivets (4) at the splash panel
(5) and remove the overflow hose (6) on the
inside of the splash panel (fig. 2).
• Remove the splash panel (5) together with the
cover fluid treatment (fig. 2).
• Take the boiler drain tube (7) out towards the
front of the dispenser (fig. 3).
• Place a sufficiently large container (capacity of at
least 12 litre / 3.2 US Gal.) underneath (fig. 3).
• Remove the plug (8) on the drain tube and let
the water flow into the container (fig. 3).
ATTENTION: After draining the water carefully
replug the drain tube of the
boiler. Once all service and/or
maintenance work has been
completed replace the drain
tube by fastening it.
Due to the high temperatures of the
Note:
boiler's components, it is advisable
to allow the boiler to cool down for
several minutes or to rinse the boiler
by refilling cold water and draining it
before commencing any work.
On assembly, note the following:
Take care to put the overflow hose back into the
slot of the splash panel.
August 2009
pen
(fig. 2).
(fig. 2). .
Functions - water system
1 2
Fig. 1
4
3
Fig. 2
7
Fig. 3
6
5
8
5A-3