Table of Contents
Advertisement
Disabling the residential gateway feature sets the unit to use bridge mode only. Use
this mode when your network is already using another router.
Click Basic > Gateway Function. The following screen displays.
Figure 14:
The Basic: Gateway Function Screen
The following table describes the labels in this screen.
Table 14:
The Basic: Gateway Function Screen
Residential Gateway
Function
UPnP IGD
3.4
The Port Forwarding Screen
Use this screen to configure port forwarding between computers on the WAN and
computers on the LAN. You can turn port forwarding on or off and configure new and
existing port forwarding rules.
Click Basic > Port Forwarding. The following screen displays.
49
49
Version 1.1, 02/2014. Copyright
Version 1.1, 02/2014. Copyright
Hitron CGNV4 User's Guide
Select the checkbox to enable the CGNV4's residential
gateway features, or deselect the checkbox to disable
them.
Select the checkbox to enable the CGNV4's Universal
Plug n Play Internet Gateway Device features, or
deselect the checkbox to disable them.
2012 Hitron Technologies
2014 Hitron Technologies
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CGNV4 and is the answer not in the manual?
Questions and answers
How can we find wps
You can find WPS on the Hitron CGNV4 by using one of two methods:
1. Push-Button Configuration (PBC): Press and hold the round WPS button on the device until it flashes. Then, activate the WPS function on your wireless device within two minutes to connect.
2. PIN Configuration: Use the Personal Identification Number (PIN) printed on the device. Enter this PIN into the other WPS-capable device to authenticate and connect.
Both methods allow a secure connection using the WPA2 standard once connected.
This answer is automatically generated