Table of Contents
Advertisement
Table 4:
GUI Overview (continued)
Secondary
Navigation Bar
Main Window
1.7
Resetting the CGNV4
When you reset the CGNV4 to its factory defaults, all user-configured settings are
lost, and the CGNV4 is returned to its initial configuration state.
To reset the CGNV4, click Admin > Device Reset. In the screen that displays, click
the Factory Default button.
The CGNV4 turns off and on again, using its factory default settings.
NOTE:
Depending on your CGNV4's previous configuration, you may need to re-
configure your computer's IP settings; see
25
25
Version 1.1, 02/2014. Copyright
Version 1.1, 02/2014. Copyright
Use this section to move from one related screen to another.
Use this section to read information about your CGNV4's
configuration, and make configuration changes.
Hitron CGNV4 User's Guide
IP Address Setup
2012 Hitron Technologies
2014 Hitron Technologies
on page 21.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CGNV4 and is the answer not in the manual?
Questions and answers
How can we find wps
You can find WPS on the Hitron CGNV4 by using one of two methods:
1. Push-Button Configuration (PBC): Press and hold the round WPS button on the device until it flashes. Then, activate the WPS function on your wireless device within two minutes to connect.
2. PIN Configuration: Use the Personal Identification Number (PIN) printed on the device. Enter this PIN into the other WPS-capable device to authenticate and connect.
Both methods allow a secure connection using the WPA2 standard once connected.
This answer is automatically generated