Hide thumbs Also See for SSC3088AS:

Advertisement

SPECIAL WARNING
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE THIS INSTALLATION MANUAL FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CLEARANCES AND DIMENSIONS
For SAFETY CONSIDERATIONS do not install oven in any combustible cabinetry which is not in accord with the stated
clearances and dimensions on page 4, Figure 2 or page 7, Figure 7.
UNPACKING YOUR OVEN
Remove all packing materials from inside the oven.
Check the oven for any damage, such as misaligned or bent oven,
damaged oven seals and sealing surfaces or dents inside the
cavity or on the front side of the oven. If there is any damage,
do not operate the oven and contact your dealer or a SHARP
AUTHORIZED SERVICER.
IMPORTANT NOTES TO THE INSTALLER
Read all of the Installation Manual before installing the oven.
Remove all packing material before connecting the electrical
supply.
Observe all governing codes and ordinances.
Be sure to leave these instructions with the consumer.
IMPORTANT NOTES TO THE CONSUMER
Keep this manual with your Operation Manual for future reference.
As when using any oven generating heat, there are certain safety
precautions you should follow. These are listed in the Operation
Manual. Read all and follow carefully.
This oven should only be installed and grounded properly by
a qualified installer or service technician.
T IN SK B 2 07 MRR 2
SSC3088AS SUPERSTEAM + OVEN
INSTALLATION MANUAL
IMPORTANT SAFETY INSTRUCTIONS
If the information in this manual is not followed
exactly, a fire or electrical shock may result that could cause
property damage, personal injury or death.
This oven must be electrically grounded in accordance with
local codes.
Do not install this oven if the surrounding wall coverings and
the cabinets cannot withstand the heat generated by the oven.
Never leave children alone or unattended in
the area where a oven is in use.
Do not use the Oven as a storage space. This creates a
potentially hazardous situation.
1
E
JaN 8, 2016

Advertisement

Table of Contents
loading

Summary of Contents for Sharp SSC3088AS

  • Page 1 If there is any damage, This oven must be electrically grounded in accordance with • do not operate the oven and contact your dealer or a SHARP local codes. AUTHORIZED SERVICER.
  • Page 2: Installation Hardware

    INSTALLATION HARDWARE ITEM NAME PART CODE Left Mounting Bracket LANGTB372MRP0 Right Mounting Bracket LANGTB378MRP0 Wood Screws XTSS740P20000 Mounting Bolts LX-CZB069MRE0 Shoulder Bolts LX-CZB068MRE0 Shoulder Bolt Sleeves PCOVPB226MRE0...
  • Page 3 OVEN MEASUREMENTS OVEN MEASUREMENTS 30" (762 mm) " (504.8 mm) " (484.1 mm) " (19.05 mm) Figure 1A FRONT BACK " " " (32 mm) (397.6 mm) (51.18mm) " (430.2 mm) Figure 1B...
  • Page 4 CLEARANCES AND DIMENSIONS FOR STANDARD SURFACE MOUNT A. 27 " cutout B. 18 " cutout* C. 15 " min. depth D. 33 " min. height E. 4" F. 18" * Critical dimension Note: Platform must be able to support 70 lbs. Figure 2...
  • Page 5 INSTALLATION INSTRUCTIONS FOR STANDARD SURFACE MOUNT 1. Mounting brackets should be installed with the 8 wood screws provided, 19 ¼" apart from each other and centered in the cabinet opening. Locate position, center punch and drill pilot hole ". See Figure 3. Front of flange even with front of surface "...
  • Page 6 INSTALLATION INSTRUCTIONS FOR STANDARD SURFACE MOUNT 6. Open the drip tray door and insert the 2 shoulder bolts supplied. Always take caution lifting heavy products. See Figure 6. Do not completely tighten. 2. Use a minimum of 2 people to lift and install oven. Place the oven adjacent to the cabinet opening, see Figure 4.
  • Page 7 CLEARANCES AND DIMENSIONS FOR FLUSH MOUNT Block added by cabinet installer Cabinet Steam oven face face Detail A Block added by cabinet Top View installer Suggested electrical Note: the mounting surface of the top block outlet location must sit 1" back from the face of the cabinet. (allowing the face of the steam oven out "...
  • Page 8 INSTALLATION INSTRUCTIONS FOR FLUSH MOUNT 1. Install mounting brackets 19 " with the 8 wood screws provided. Locate position, center punch and drill pilot hole ". See Figure 8. Front of flange even with front of surface of the installed block 1 /4 "...
  • Page 9 INSTALLATION INSTRUCTIONS FOR FLUSH MOUNT 6. Open the drip tray door and insert the 2 shoulder bolts supplied. Always take caution lifting heavy products. See Figure 11. Do not completely tighten. 2. Use a minimum of 2 people to lift and install oven. Place the oven adjacent to the cabinet opening, see Figure 9.
  • Page 10: Electrical Outlet

    Refer to the Operation Manual for cleaning instructions. SHARP ELECTRONICS CORPORATION • 1 Sharp Plaza, Suite 1 • Mahwah, New Jersey 07495-1123 • USA SHARP ELECTRONICS OF CANADA LTD • 335 Britannia Road East • Mississauga, ON L4Z 1W9 • Canada...

Table of Contents