Table of Contents
Advertisement
3. Check whether all settings that you have made in "Step 1: Preparing for installation" have
4. Click "Next". The USB driver is being installed. The following window opens:
5. Click "Finish".
6. Check whether the system has set up the correct COM port for the SIPROM T
Modem and SIPROM T for SITRANS TH100/TH200/TR200/TF200/TF with TH200
Operating Instructions, 06/2014, A5E00468983-04
been accepted. If not, you have to make these settings afresh as described in "Step 1:
Preparing for installation".
parameterization software. For this purpose, invoke the "Control panel" via "Start ->
Settings". The following window opens:
Installing
4.3 Windows XP and earlier
17
Advertisement
Table of Contents
