Panasonic KX-UDS124 Important Information Manual page 4

Dect cell station unit
Hide thumbs Also See for KX-UDS124:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
The SIP-CS and the cables should never be placed near or over a radiator or other
heat source.
The SIP-CS should not be placed outdoors (use indoors).
The SIP-CS should not be placed near high-voltage equipment.
The SIP-CS should not be placed on a metal object.
The SIP-CS should be kept free of dust, moisture, high temperature (more than
40 °C), low temperature (less than 0 °C), and vibration, and should not be exposed
to direct sunlight.
When driving the screws into the wall, be careful to avoid touching any metal laths,
wire laths or metal plates in the wall.
Use cables that are fire-resistant or fireproof.
Make sure the cables are securely fastened to the wall.
The AC adaptor is used as the main disconnect device. Ensure that the AC adaptor
is located near the SIP-CS and is easily accessible.
Disconnect the AC adaptor cord and all cables from the SIP-CS before cleaning.
Clean the SIP-CS with a soft, dry cloth. Do not use liquid, aerosol cleaners,
abrasive powders, or chemical agents to clean the SIP-CS.
When left unused for a long period of time, disconnect the SIP-CS from the AC
outlet. When the SIP-CS receives power from a PoE power supply, disconnect the
LAN cable.
Medical—consult the manufacturer of any personal medical devices, such as
pacemakers, to determine if they are adequately shielded from external RF (radio
frequency) energy. (The SIP-CS operates in the frequency range of 1880 MHz to
1900 MHz, and the output peak power level is less than 0.25 W.) Do not use the
SIP-CS in health care facilities if any regulations posted in the area instruct you not
to do so. Hospitals or health care facilities may be using equipment that could be
sensitive to external RF (radio frequency) energy.
To ensure the security of private conversations, only connect the SIP-CS to a
secure network.
To prevent unauthorised access, only connect the SIP-CS to a network that is
properly managed.
Make sure all personal computers that are connected to the SIP-CS employ up-to-
date security measures.
To avoid unauthorised access and possible abuse of your phone system, we
strongly recommend:
Keeping the password secret.
Changing your password regularly.
Selecting a complex, random password that cannot be easily guessed.
Maintain the distances listed in "Required Distances between Equipment" in the
Installation Guide between equipment in order to prevent noise, interference or the
disconnection of a conversation. (The distance may vary depending on the
environment.)
4

Advertisement

Table of Contents
loading

Table of Contents