Call Transfer; Transferring To Extension In Pbx - Panasonic KX-TDE100 Operating Manual

Panasonic pure ip-pbx operating manual
Hide thumbs Also See for KX-TDE100:
Table of Contents

Advertisement

1.3 Telephone Features and Operation

1.3.11 Call Transfer

Transferring to an Extension in the PBX
Transferring to an Outside Party Using the PBX Service
You can transfer a held call without talking, and go on-hook even if the transferred party does
not answer the call. (Not available for SIP Extensions.)
If a transferred call is not answered within a specified time, it will ring at a preprogrammed
extension, if set, or at your extension again. If you are off-hook at that time, you will hear an
alarm tone. If an outside call is not answered within a specified time, it is automatically
disconnected.
For users of SIP Extensions:
Even if your telephone has a TRANSFER button, you cannot use it to transfer calls.
Please make sure to use the HOLD button.
The transfer operation for SIP Extension users may differ from the steps in this section,
and may vary depending on the type of telephone being used.
Transferring to an Extension in the PBX
To transfer
PT/PS
During a conversation
TRANSFER
Press TRANSFER.
SLT
During a conversation
Press Recall/
hookswitch.
44
Operating Manual
(DSS)
OR
C.Tone
extension no.
Press DSS or dial
extension number.
extension no.
C.Tone
Dial extension
number.
Talk.
This step can be omitted.
On-hook.
Talk.
This step can be omitted.
On-hook.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tde200

Table of Contents