Panasonic KX-TD500 Features Manual page 43

b)
When "VM" or "AA" is specified in the "Group Type" setting of an Extension Group,
and "DIL 1:N" is specified in the "Group Type" setting of an Incoming Group, all the
extensions belonging to the Extension Group work as a VM or AA group.
• Calls to a UCD group or an Operator group (Single) hunt for an idle extension in the order
assigned in the Incoming Group. It is programmable whether to start at the extension
following the last one called or to always start at the first assigned extension by System
Programming <Section 3.5 Incoming Group, "Search Mode" in the Programming Guide>.
• This feature overrides the Restriction by the Tenant Service.
• UCD Login Monitor
Login/Logout status of the UCD Group members can be monitored by the extension
specified as the Supervisor Extension through Busy Lamp Field of the corresponding DSS
button.
• The mailbox number can be assigned on an Incoming Group basis. When an incoming call
is redirected to a VM extension by IRNA or Overflow feature, the system sends the digits
of this mailbox number to the VPS. When "Mailbox No." is set to "Blank," the system sends
the FDN to the VPS.
• If there is any message waiting notification in the mailbox of an Incoming Group, the
message waiting lamp on the members of the Incoming Group will not turn on.
If the mailbox number of the extension is assigned as that of an Incoming Group, a message
waiting notification to the Incoming Group is left on the corresponding extension. The
extension user can listen to the message in his mailbox simply by pressing the red lit
MESSAGE lamp.
Programming Guide References
• 1.4 Extension Port Assignment
– Group No.
• 2.3 Numbering Plan
– Login / Logout
• 3.5 Incoming Group
– Group No.
– FDN
• 4.3 Extension Line
– Group No.
• 4.7 ISDN Extension Line
– Group No.
Features Guide References
1.3 System Features
• DIL 1:N Group
• Floating Station
• Operator Group
1.5 Attended Features
• Ring Group
• Uniform Call Distribution (UCD)
Features Guide
General Features
43